| Type: | Capacitive |
|---|---|
| Structure Type: | Measuring Core |
| Measuring Medium: | Liquid |
| Output Signal Type: | Analog Type |
| Production Process: | SemiConductor Integrated |
| Material: | Stainless Steel |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Feature |
| Flow Meter Parameters |
| Power Supply | 24 VDC |
| Power Consumption | 10W |
| Accuracy | ± 0.5% accuracy of rate from 0.3-10 m/s ± 1.0% accuracy of rate from 0.1-0.3 m/s |
| Repeatability | 0.2% |
| Minimum Fluid Conductivity | 5.0 micromhos/cm |
| Flow Direction | Unidirectional or bidirectional, 2 separate totalizers (programmable) |
| Zero-point Stability | Automatic correction |
| Ambient Temperature | -4 to 140° F (-20 to 60° C) |
| Electrode Materials | SS316L; Optional: Titanium; Hastelloy Alloy C; Tantalum |
| Liner Material | PTFE, FEP, Hard Rubber |
| Fluid Temperature | PTFE: 120°C Standard (Customized: 180°C) Rubber: 60°C |
| Pressure Limits | 1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa |
| Coil Power | Pulsed DC |
| Pipe Spool Material | SS316 |
| Meter Housing Material | Carbon Steel welded or SS304 (Sanitary Connection) |
| Flange | Carbon Steel - Standard (ISO 7005-1) ANSI, DIN and JIS Flange Connections Optional Stainless Steel Grounding Rings |
| Wireless Part Parameters |
| Frequency Range | 119~1050MHz |
| Receiver Sensitivity | -126dBm |
| Emission Power | 31dBm |
| Off Current | 30nA |
| Standby Current | 50 nA |
| Receiver Current | 10.0mA |
| Emission Current | 450mA |
| DATA Rate | 0.123~1M |
| Emission Range | 10000 Meter In Condition(434M 2.4K) |
| Electric Connection |
| Accessory: |
| Knowledge | |||
| How to choose the Lining materials | |||
| Lining material | Main Performance | Applications | |
| 1.The most steady material in plastics which is resistibal to boiling hydrochloric acid,vitriolandqua fortis as well as strong alkali and organic impregnates. 2.Not be perfect in abrasion resistance. |
Strong corrosive mediums such as strong acid and alkali |
||
| PFA | Having the same abrasion resistance with PTFE. Having strong ability of load pressure resistance. |
Applicable in state of load pressure | |
| F46 | 1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. |
1.The same as PTFE.2.Applicable in mediums of low abrasion. |
|
| Neoprene | 1.Be of good elasticity,retractility and abrasion resistance. 2.Be resistant to low aicd,alkali and salt but not for oxidation mediums. |
Water,sewage and slurry,mineral serosity of low abrasion. |
|
| Polyurethane | 1.Be of good abrasion resistibility. 2.Not be perfect in acid/alkali resisitance. 3.Can't be used for water mixed with organic impregnants. |
Applicable in mineral serosity,slurry and coal slurry of high abrasion. |
|
| How to choose the electrode materials | |
| Electrode material | Applications |
| Stainless steel SUS316 | Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol, chemistry,carbamide,etc |
| Stainless steel covered with tungsten carbide |
Applicable in mediums of no corrosive and low abrasion. |
| Hastelloy B(HB) | Having strong resistance to hydrochloric acid of any consistance which is below bioling piont. Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt. |
| Hastelloy C(HC) | Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water |
| Titanium | Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion. |
| Da | In addition to fuming sulfuric acid, alkali remaining outside chemicals, including boiling hydrochloric acid |
| Platinum-iridium | Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt. |
| Order |
| IFD50W | IPD50W Wireless Long Range Electromagnetic Flow Meter | ||||||||||
| 1 | 433MHZ | ||||||||||
| 2 | ZigBee | ||||||||||
| 3 | GPRS | ||||||||||
| 4 | SMS | ||||||||||
| 5 | GPRS+SMS | ||||||||||
| 6 | Wi-Fi | ||||||||||
| 7 | Others | ||||||||||
| DNxxx | Pipe Diameter xxx millimeter | ||||||||||
| A | Lining materials | ||||||||||
| B | PFA Lining materials | ||||||||||
| C | F46 Lining materials | ||||||||||
| D | Neoprene Lining materials | ||||||||||
| Polyurethane Lining materials | |||||||||||
| 1 | Stainless steel SUS316 Electrode Material | ||||||||||
| 2 | Stainless steel covered with tungsten carbide Electrode Material covered with tungsten carbide |
||||||||||
| 3 | Hastelloy B(HB) Electrode Material | ||||||||||
| 4 | Hastelloy C(HC) Electrode Material | ||||||||||
| 5 | Titanium Electrode Material | ||||||||||
| 6 | Da Electrode Material | ||||||||||
| 7 | Platinum-iridium Electrode Material | ||||||||||
| A | Outer Adapter Supply | ||||||||||
| B | Inner Battery Supply | ||||||||||
| Y | Accessories | ||||||||||
| N | No | ||||||||||
| IFD50W | 1 | DN100 | --- | A | 1 | A | Y | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}