CAS No.: | 9003-04-7 |
---|---|
Formula: | [C2h4o]N |
EINECS: | 294-352-4 |
Material: | TPU |
Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
Plastic Properties After Heated: | Thermoplastic Plastics |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.
Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.
Performance:
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.
Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.
Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.
Grade | Hardness | ||||||||||
Standard | 65A | 70A | 75A | 80A | 85A | 90A | 95A | 98A | 64D | 72D | |
density,g/cm³ | ASTM D792 | 1.10±0.02 | 1.14±0.02 | 1.20±0.02 | 1.20±0.02 | 1.21±0.02 | 1.21±0.02 | 1.21±0.02 | 1.22±0.02 | 1.22±0.02 | 1.22±0.02 |
Hardness,Shore A/D | ASTM D2240 | 65±3 | 70±3 | 75±3 | 80±3 | 85±3 | 90±3 | 95±3 | 98±3 | 64D±3 | 72D±3 |
300%Tensile Stress,Mpa | ASTM D412 | 3 | 4.5 | 6.5 | 9 | 11 | 15 | 22 | 24 | 33 | 38 |
Tensile strength,Mpa | 18 | 29 | 33 | 36 | 43 | 50 | 51 | 52 | 54 | 55 | |
Elongation at break,% | 900 | 800 | 800 | 700 | 600 | 550 | 500 | 480 | 420 | 350 | |
Tear strength,KN/m | ASTM D624 | 45 | 55 | 80 | 90 | 100 | 110 | 130 | 150 | 170 | 200 |
70ºCCompression permanent deformation,% | ASTM D359 | 35 | 40 | 40 | 40 | 45 | 45 | 50 | 50 | 55 | 60 |
Abrasion,mm³ | ASTM D5963 | 100 | 70 | 60 | 55 | 50 | 50 | 45 | 45 | 45 | 45 |
Suppliers with verified business licenses