Type: | Capacitive |
---|---|
Structure Type: | Measuring Core |
Measuring Medium: | Liquid |
Output Signal Type: | Analog Type |
Production Process: | SemiConductor Integrated |
Material: | Stainless Steel |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Feature |
Flow Meter Parameters |
Power Supply | 24 VDC |
Power Consumption | 10W |
Accuracy | ± 0.5% accuracy of rate from 0.3-10 m/s ± 1.0% accuracy of rate from 0.1-0.3 m/s |
Repeatability | 0.2% |
Minimum Fluid Conductivity | 5.0 micromhos/cm |
Flow Direction | Unidirectional or bidirectional, 2 separate totalizers (programmable) |
Zero-point Stability | Automatic correction |
Ambient Temperature | -4 to 140° F (-20 to 60° C) |
Electrode Materials | SS316L; Optional: Titanium; Hastelloy Alloy C; Tantalum |
Liner Material | PTFE, FEP, Hard Rubber |
Fluid Temperature | PTFE: 120°C Standard (Customized: 180°C) Rubber: 60°C |
Pressure Limits | 1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa |
Coil Power | Pulsed DC |
Pipe Spool Material | SS316 |
Meter Housing Material | Carbon Steel welded or SS304 (Sanitary Connection) |
Flange | Carbon Steel - Standard (ISO 7005-1) ANSI, DIN and JIS Flange Connections Optional Stainless Steel Grounding Rings |
Wireless Part Parameters |
Frequency Range | GSM:850,900,1800,1900MHZ |
Receiver Sensitivity | -108dBm |
Emission Power | 32dBm |
Off Current | 240uA |
Stand_By Current | 2.8mA |
Receiver Current | 100mA |
Emission Current | 250mA |
DATA Rate | 0.123~1M |
Electric Connection |
Knowledge | |||
How to choose the Lining materials | |||
Lining material | Main Performance | Applications | |
1.The most steady material in plastics which is resistibal to boiling hydrochloric acid,vitriolandqua fortis as well as strong alkali and organic impregnates. 2.Not be perfect in abrasion resistance. |
Strong corrosive mediums such as strong acid and alkali |
||
PFA | Having the same abrasion resistance with PTFE. Having strong ability of load pressure resistance. |
Applicable in state of load pressure | |
F46 | 1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. |
1.The same as PTFE.2.Applicable in mediums of low abrasion. |
|
Neoprene | 1.Be of good elasticity,retractility and abrasion resistance. 2.Be resistant to low aicd,alkali and salt but not for oxidation mediums. |
Water,sewage and slurry,mineral serosity of low abrasion. |
|
Polyurethane | 1.Be of good abrasion resistibility. 2.Not be perfect in acid/alkali resisitance. 3.Can't be used for water mixed with organic impregnants. |
Applicable in mineral serosity,slurry and coal slurry of high abrasion. |
How to choose the electrode materials | |
Electrode material | Applications |
Stainless steel SUS316 | Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol, chemistry,carbamide,etc |
Stainless steel covered with tungsten carbide |
Applicable in mediums of no corrosive and low abrasion. |
Hastelloy B(HB) | Having strong resistance to hydrochloric acid of any consistance which is below bioling piont. Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt. |
Hastelloy C(HC) | Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water |
Titanium | Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion. |
Da | In addition to fuming sulfuric acid, alkali remaining outside chemicals, including boiling hydrochloric acid |
Platinum-iridium | Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt. |
Accessory: |
Order |
IFD55G | IFD55G GPRS+SMS Electromagnetic Flow Meter | |||||||||
1 | 433MHZ | |||||||||
2 | ZigBee | |||||||||
3 | GPRS | |||||||||
4 | SMS | |||||||||
5 | GPRS+SMS | |||||||||
6 | Wi-Fi | |||||||||
7 | Others | |||||||||
DNxxx | Pipe Diameter xxx millimeter | |||||||||
A | Lining materials | |||||||||
B | PFA Lining materials | |||||||||
C | F46 Lining materials | |||||||||
D | Neoprene Lining materials | |||||||||
Polyurethane Lining materials | ||||||||||
1 | Stainless steel SUS316 Electrode Material | |||||||||
2 | Stainless steel covered with tungsten carbide Electrode Material covered with tungsten carbide |
|||||||||
3 | Hastelloy B(HB) Electrode Material | |||||||||
4 | Hastelloy C(HC) Electrode Material | |||||||||
5 | Titanium Electrode Material | |||||||||
6 | Da Electrode Material | |||||||||
7 | Platinum-iridium Electrode Material | |||||||||
A | Outer Adapter Supply | |||||||||
B | Inner Battery Supply | |||||||||
IFD55G | 5 | DN100 | --- | A | 1 | A | Y | |||
Suppliers with verified business licenses